Now no one has to hold  Heavy Equipment™ Hammer 
Application Images
Right click on a photo below to save the image to your computer. To request high-resolution versions of these images, please contact Chad Kirschner at chadk@slidesledge.com or 847.230.3608.

            ^ Top   

Logos
Right click on a logo below to save the image to your computer. To request high-resolution versions of these logos, please contact Chad Kirschner at chadk@slidesledge.com or 847.230.3608.





^ Top


Product Images
Right click on a photo below to save the image to your computer. To request high-resolution versions of these images, please contact Chad Kirschner at chadk@slidesledge.com or 847.230.3608.


 ^ Top


Tips & Accessories

 1/2" Diameter Pin Driver5 lb Handle Weight #25220
Recommended for pins and bolts greater than 1/2" up to 7/8" in diameter#1001001
Increases the Slide Sledge® striking force by 5 lbs, works with any of the four tools by threading onto tool handle7/8" Diameter Pin DriverCurved Chisel Tip#25225
Recommended for pins greater than 7/8" up to 2" in diameter#25240
1 3/8" tip ideal for chopping away hardened debris & shearing metal bolts and rivets up to 3/8" grade 81 1/4" Diameter Pin DriverScarifier Tooth Tip#25290
Recommended for pins greater than 1 1/4" up to 2" in diameter#25340
Removes scarifier teeth on most motor graders. The fork design allows the tech. to split the trenching arm where the scarificer tooth is forced fit2" Diameter Pin DriverTie Rod/Ball Joint
Separator Forks#25291
Recommended for pins greater than 2" up to 2/5" in diameter11/16" - #25211
15/16" - #25212
1 1/8" - #25213
1 7/16" - #25214
 2 1/2" Diameter Pin DriverUtility Wedge Tip#25292
Recommended for pins greater than 2.5" up to 3" in diameter #25325
All purpose impact tool designed to separate parts and straighten steel with maximum force3" Diameter Pin DriverTie Rod/Ball Joint
Separator Adapter#25293
Recommended for pins greater than 3" up to 4" in diameter
#25210
Attach all Slide Sledge® separator forks and most common forks available todayRipper Tooth Pin Removers Ripper Tooth Pin Inserters
3/8" Diameter
#25300
Use on pins as small as 3/8" and
up to 1/2" with minimum tooth spacing of 2 3/4"

1/2" Diameter
#25280
Use on pins as small as 1/2" and up to 3/4" with minimum tooth spacing of 3 1/2"

3/4" Diameter
#25261  
Use on pins as small as 3/4" and up to 1" with minimum tooth spacing of 4 1/2"
3/8" Diameter
#25310
Use on pins as small as 3/8" and up to 1/2" with minimum tooth spacing of 2 3/4"

1/2" Diameter
#25270
Use on pins as small as 1/2" and up to 3/4" with minimum tooth spacing of 3 1/2"

3/4" Diameter
#25260  
Use on pins as small as 3/4" and up to 1" with minimum tooth spacing of 4 1/2"

Race/Bearing/Seal Adapter Bushing Driver Adapter#25321   
Install races, bearings and seals with this adapter driver tip. Add drive plates to the end of the adapter in various combinations. Fits plates with a common 9/16" center hole, up to 3/4" high.

#25322   
Proper installation of bushings will be accomplished easily and quickly with this adapter driver tip. Fits drivers with a common 3/4" center hole, up to 7'8" high. Tie Rod/Ball Joint Separator 3 Tip Set  #25209
Slide Sledge® separator adapter and 11/16", 15/16" 1 1/8" forks 
^ Top   

 the chisel! The powerful slide sledge, heavy equipment hammer reduces dangereous, time consuming hammer and chisel jobs to a one man, one tool operation. The linear motion of the slide sledge focuses power for precision impact to drive pins and make other tough maintenance jobs easier, faster and a whole lot safer. Reduce downtime and increase your profits.