Allmand MAXI-LITE Specifications
MAXI-LITE 883XL & 883XLH SPECIFICATION Innovative Allmand ProductsAllmand LSC100 Light Sequence Commander
LSC 100 Light Sequence Commander Automatic Light Tower Controller
                              Allmand Maxi-Lite® 15330 and 20330
                                  
Allmand MAXI-LITE 15330 and 20330 Specifications
 MAXI-LITE 15330 & 20330XLH SPECIFICATIONS Dimensions Tower Height mast lowered: ............ 5’ 9” (1.75 m) Assembly: Heavy-duty, three section tower,  Height mast raised: ............... 30’ (9.14 m)  self-lubricating nylon rollers Length without fixtures: ....... 13’ 6” (4.05 m) Rotation: 360º rotatable from the ground Length with fixtures: ............. 14’ 9” (4.425m)
Width with manual winch: ... 76 ¼” (195 cm)    Width with electric winch: ... 74” (189.74 cm)
Outrigger width: .................... 12’ 10” (6.06 m) Trailer Wheels and tires: .................. 15” Frame: Formed, welded steel    Hitch: Adjustable height, reversible combination,      2" ball/3” pintle   Enclosure: Heavy-duty with 10-gauge side     panels and 12-gauge hood    Doors: Lockable lift-up access  I Front panels: Color-impregnated ABS plasticor painted or coated steel Engine Tail lights: Stop, turn and running
Forklift pockets: standard Isuzu 4LE1liquid cooled diesel engine with 12 volt electric start (Standard)   Fuel: Diesel Fuel capacity: 50 gallon (up to 100 hrs. of   continuous operation)
Low oil pressure, high temperature automatic shutoff, heater plug cold start system

  Stabilizers                                           Four-point outrigger design                                  Tower center-mounted between two retractable side outriggers , tongue jack and rear jack Remains operational in wind gusts up to 65 mph
  Lighting Lamps: 1000/1250 watt metal Halide HIDModel 15330-4 Fixtures  Model 20330-4 Fixtures       Domestic Shipping Weight Electrical Light fixtures:  Each fixture 15 lbs. (6.75 kg)Alternator: 60 Hz, 1 phase 90 lbs. (40.5 kg) for six (6) Model 15330-15 kw Trailer and mast:  2220 lbs. (1007 kg) Model 20330-20 kw Total weight: Approx. 2280 lbs. (1034 kg) with   Circuits: Hard-wired electrical 4 (4) light fixtures or 2310 lbs. (1048 kg) with Ballast: Easily serviceable,  six (6) light fixtures “componentized” assemblies  1-120 VAC, 2-125/250 VAC twist lock convenience outlets, 1 50 Amp Service Outlet, Main Disconnect Breaker and Ground Rod.            Available Options    High-pressure sodium lamps and ballasts Inside storage bracket for (4) SHO lamp fixtures Sound attenuation package Cushion-mounted light fixtures Saf-T-Visor™  Hydraulic mast (Model 883XLH) 1250 Watt Lighting System CSA Approved Package LSC100 Automatic Light Sequence Commander Arctic Package Electric Winch Four or Six-Light Packages Available 20 Kw 3 Phase Generator
 Allmand LSC100 Automatic Light Sequence Commander
  Allmand Bros Inc. © 2006 | Home | FAQs | Contact | Site Map
ECLIPSE, MAXI-LITE, AND MAXI-HEAT are Registered Trademarks of ALLMAND BROS. INC. Allmand Maxi Heat
                           
MAXI-HEAT SPECIFICATIONS  DIMENSIONS  STANDARD TRAILER  Height:   6' (1.83 m) INCLUDES Length:   16' (4.88 m) • Heavy gauge steel enclosure Width:   6' 8" (2.03 m) • Lockable access doors    • Full floor   • 5,000 lb. (2,268 kg) leaf spring axle,
   15" (38.10 cm) wheels and tires  ENGINE • Safety chains  Isuzu Liquid cooled diesel • Adjustable height, reversible 2" (5.08 cm) ball and  Displacement:  91.3 cu. in. (1496 cc)    3" (7.62 cm) diameter pintle hitch Power Output: 19 BHP continuous  • Front and rear screw jacks  @ 1800 RPM (14.2 KW)* • Instrument panel and controls Starting: 12 V Electrical-Group 4D Battery  • Hour meter  Glow plug starting assist • Circuit breakers for heaters Oil Sump Capacity: 6.7 U.S. quarts (6.3 L) • Interior compartment light  Low Oil Pressure Shutdown:  • Turn signals, stop and tail lights Fuel rack solenoid   High Temperature Shutdown:   Fuel rack solenoid     WEIGHT   Empty:   3,500 Ibs. (1,587.57 kg)   With Fuel:   4,651 Ibs. (2,109.66 kg) GENERATOR   8 KW AVR regulation         FUEL SYSTEM   Fuel Requirements:  No. 1 fuel oil or blend HEATERS Fuel Consumption: Two (2) I.C.E. Frost Fighter OHV 500 indirect Engine: 1.08 GPH (4.1 LPH) at full load* fired heating units, 500,000 BTU/HR* Heaters, each:  500,000 BTU-3.5 gal. per hour   (13.251 per hour) Multiple heat outlets for a wide variety of heat  Fuel Capacity: 191.1 usable U.S. gal. (2253 L) distribution options       Optional flexible ducting easily connects to   heat outputs OPTIONS INCLUDE   • Lockable tool/accessory box Heated Air Output:  Total of 5600 CFM  • Quartz light tower package (2 x 500 watts) from twin fans* • Elastomer ducting Temperature Rise: 180 (82.2 c) with duct  • Duct mounting band creating  0.5" (1.27 cm) static pressure* • Trailer brakes Operating Time:  More than 24 hours  • Duct storage without refueling* • Fuel pressure gauges   • Slip lock duct connectors   • Canadian VIN package with hydraulic or electric      brakes   • Bacharach smoke spot tester   
TLB, LSC 100, LIGHT SEQUENCE COMMANDER, NIGHT RESPONDER, NIGHT-LITE PRO, and PORT-A-LITE are Trademarks of ALLMAND BROS. INC
  THE SEQUENCE ADVANTAGE  The LSC100, available as an option on all new Allmand Light Towers or as a retrofit option on many existing Allmand or competitive light towers, offers peace of mind through a sequenced command system.   FEATURES    Engine Auto Start
 Enables the unattended startup and shut down of the light tower through a programmable timer, photocell sensor, or wireless communication device.
  Sequenced Light Control
 Provides increased protection from generator damage by sequencing lights to turn on after engine is started and warmed up and off before the engine is shut down.
  Preset Photocell Sensor
 Ensures user-friendly light tower operation without human involvement.  The sensor automatically starts up the power unit and turns on the lights at dusk and shuts off the lights and power unit at dawn, enhancing job site efficiency by saving time and money.
 Seven-day Programmable Timer
 Provides increased protection from generator damage by sequencing lights to turn on after engine is started and warmed up and off before the engine is shut down.
       Smart Start Circuit
 Senses engine water temperature to determine glow plug time requirements and repeat intervals (if necessary) to start diesel engine.  Taking command of the entire engine starting requirements, Smart Start appropriately responds to different ambient conditions.
 Low Fuel Level Shut Down
 Automatically initiates sequenced shut down when fuel level reaches 10% of capacity.  This eliminates any potential to run the machine completely out of fuel, which could result in over-cranking of the starter and the need to bleed the fuel system.
     Diagnostic LED Fault Protection and Indicator
 Provides information indicating failure during automatic start sequence and the cause of machine shut down including low oil pressure, high water temperature or low fuel.
 Integrated low oil pressure and high water temperature shut down
 Initiates immediate shut down if oil pressure falls below a specified pressure and sequenced shut down if water temperature exceeds maximum acceptable level providing added engine protection.
  
S Dimensions EPL-20W SPECIFICATIONSENGINEIsuzu, 34.1 hp continuous @ 1,800 rpm Liquid-cooled diesel Low oil pressure/high temperature automatic shutdown  POWER OUTPUT20 kw, 60 Hz, 1-phase AVR regulated generator  STARTING12-V electric Glow plug cold weather starting system  FUEL CAPACITY50 gal. (189.3 L)  LIGHTINGFour or six 1000/1250-watt metal halide HID SHO fixtures One 500 watt quartz fixture (only available with four fixtures)   ELECTRICALCIRCUITS: Hard-wired electrical BALLAST: "Modular" assembly      two - 120 VAC duplex GFCI convenience outlet      two - 240 VAC twist-lock receptacles and one 50 amp outlet Ground Rod  TOWERASSEMBLY: Heavy-duty, chrome plated three-section tower  Self-lubricating nylon wear pads ROTATION: 360° rotatable from the ground  TRAILERFRAME: Fabricated unibody HITCH: Adjustable height, reversible combination 2 in. ball/ 3 in. pintle ENCLOSURE: Heavy duty with 10-gauge side panels and 12-gauge hood Bright tread plate aluminum front panels DOORS: Lockable, 12 gauge lift-up access TAIL LIGHTS: LED stop, turn and running Forklift pockets and lifting eye Tie down rings Chrome wheels  STABILIZERSFour-point design Tower center-mounted between between two retractable side outriggers,      tongue jack and rear jack  Chrome plated retractable outriggers Remains operational in wind gusts up to 65 mph (104.6 kph)   DOMESTIC SHIPPING WEIGHT Light fixtures: 15 lbs. (6.8 kg) (each) Trailer and mast: 2,220 lbs. (1007 kg) Total weight: Approx.       2,220 lbs (1007 kg) with four fixtures      2,280 lbs (1034 kg) with six fixtures Tower Height mast lowered: ............ 5’ 9” (1.75 m) Assembly: Heavy-duty, three section tower,  Height mast raised: ............... 30’ (9.14 m)  self-lubricating nylon rollers Length without fixtures: ....... 13’ 6” (4.05 m) Rotation: 360º rotatable from the ground Length with fixtures: ............. 14’ 9” (4.425m)
Width with manual winch: ... 76 ¼” (195 cm)    Width with electric winch: ... 74” (189.74 cm)
Outrigger width: .................... 12’ 10” (6.06 m) Trailer Wheels and tires: .................. 15” Frame: Formed, welded steel    Hitch: Adjustable height, reversible combination,      2" ball/3” pintle Engine Enclosure: Heavy-duty with 10-gauge side  1800 rpm, liquid cooled diesel engine options   panels and 12-gauge hood  with 12-volt electric start Doors: Lockable lift-up access    Front panels: Color-impregnated ABS plastic Models Available Tail lights: Stop, turn and running
Forklift pockets: standard Kubota 1105BG (13.6 hp continuous) (Standard)    
Fuel: Diesel
Fuel capacity: 50 gallon (up to 70 hrs. of   continuous operation)        Stabilizers Low oil pressure, high temperature automatic  Four-point outrigger design shutoff, heater plug cold start system Tower center-mounted between two retractable     side outriggers, tongue jack and rear jack    Remains operational in wind gusts up to 65 mph     (104.5 kph) Lighting    Lamps: Six(6) 1000 watt metal Halide HID       Domestic Shipping Weight    Light fixtures:  Each fixture 15 lbs. (6.75 kg), Electrical  90 lbs. (40.5 kg) for six (6) Alternator: 8 kw, 60 Hz, 1 phase Trailer and mast:  1960 lbs. (882 kg) Circuits: Hard-wired electrical Total weight: Ballast: Easily serviceable,   Approx. 2080 lbs. (936 kg) with six (6) light  “componentized” assemblies  fixtures 2-120 VAC, 1-240 VAC convenience outlets   Ground rod             Available Options    High-pressure sodium lamps and ballasts Inside storage bracket for (4) SHO lamp fixtures Sound attenuation package Cushion-mounted light fixtures Saf-T-Visor™  Hydraulic mast (Model 883XLH) Arctic package  Allmand LSC100 Automatic Light Sequence Commander
NIGHT-LITE PRO SPECIFICATIONS Dimensions Tower Height mast lowered: ............ 6’ 1” (1.9 m) Assembly: Heavy-duty, three section tower  Height mast raised: ............... 30’ (9.14 m) Guide pads: Self-lubricating nylon Length with fixtures: ............. 13’ 6” (4.04 m) Rotation: 360º rotatable from the ground Width ...................................... 4' 1 1/2" (1.26 m)
Outrigger width: .................... 7’ 9 1/2” (2.37 m)    Wheels and tires: .................. 13” Trailer   Frame: Formed, welded steel   Enclosure: Heavy duty with 10-gauge side   Engine (Standard)  panels and 12 gauge hood and lockable
lift-up doors Model: Kubota D905 BG, 1800 rpm
liquid-cooled diesel with 12-volt electric start Fenders: Dent and rust resistant rotational molded  Displacement: 54.86 cu. in. (898 cc) Hitch: Two inch ball/3 inch pintle  Alternator: 30 amp, 12-volt Lights: Stop, turn , running  Power output: 10.5 hp Forklift Pockets: Standard          Fuel: Diesel   Fuel consumption: .46 gal/hr (1.70 L/hr at Stabilizers  73% load) Three-point outrigger design Fuel capacity: 30 gallon Tower center-mounted between two retractable side outriggers, tongue jack  Oil sump capacity: 5.4 U.S. qt. (5.1 L)  and rear jack Low oil pressure, high temperature automatic
shutoff, glow plug cold start system Remains operational in wind gusts up to 65 mph (104.59 kph)                       Lighting Domestic Shipping Weight Lamps: Four (4) 1250 watt metal Halide HID Light fixtures:  Each fixture 15 lbs.  5000 Watt Lighting System Standard  (6.75 kg), 60 lbs. (27 kg) for four (4)   Trailer and mast:  1540 lbs. Electrical Total weight:   Alternator:  6.0 kw alternator, 60 Hz, 1 phase  Approx. 1600 lbs. with four (4) light fixtures Circuits: Hard-wired electrical    Ballast: Easily serviceable,      "componentized" assemblies   Ground rod: Standard   120 volt convenience outlets: Standard                    Available Options   Saf-T-Visor™   Electric winch   Allmand LSC100 Automatic Light Sequence Commander    Arctic Package   Sound Attention Package   220 VAC twist lock receptacle   CAT 3003 (11.3 hp)   Lombardini LDW903 (12.2 hp)   8 kw generator         S